Technical Data; Cleaning Instructions - darco Body Armor Stirrup Acute Mode D'emploi

EN Use
> For maximum stability, we recommend that a sport shoe is worn.
> For increased comfort, wear an absorbing long sock.
Put on the Body Armor® Stirrup Active as follows:
1. Adjust the width by loosening the hook and loop connection of the heel pad and then refitting
to your foot width.
2. Place the brace. The DARCO logo should be visible on the outside of the foot.
3. First attach the lower hook-and-loop tape.
4. Now attach the upper hook-and-loop tape.
5. When fitting the brace, make sure it fits tightly and comfortably.
6. Now put your shoe on.

Technical data

Sizes
The ankle brace can be worn on the right
or left and is available in a universal size.
Colour
Black
Working life / Lifespan of the product
The lifespan of the medical device is determined by natural wear and tear due to proper han-
dling / cleaning. The medical device is designed to be used for the usual duration of use prescribed
by a doctor without showing a reduction in safety or performance. After the period of use
prescribed by your doctor, check the function of the product together with your doctor or specialist
dealer.
Maintenance
The product does not require maintenance.

Cleaning instructions

For cleaning, we recommend washing the foam pads by hand with warm water and mild soap or
detergent. The plastic parts of the orthosis may be cleaned with a damp cloth. To avoid damage to
the material, all hook-and-loop fasteners should be closed before washing.
Disposal
Please dispose of the packaging in an environmentally friendly manner. Dispose of this
product after use in accordance with applicable local laws and regulations.
Material
Lateral shells: Polypropylene and fibreglass
Rivets: Polypropylene
Soft inlay: Nylon / neoprene
Heel pads: Nylon
Belts: Polyester
Hook-and-loop fastener: Nylon