Control Functions - Airone MOZART Instructions Pour L'utilisation, L'entretien Et L'installation

As for the height adjustment of the moving part of the downdraft, see Fig. 2.
According to the thickness of the work top and the cover, it is possible to adjust of 20mm.
This adjustment is possible by acting on the two screws that secure the central pivot of the actuator (Fig. 3).
Fig. 2
REMOTO CONTROL
stops.
To restart the movement, it is necessary to press button "D" or "E".
If the button is pressed when the suction motor is on, the motor automatically turns off.
NOTES: at first use it is necessary to start the remote control learning. When the downdraft is turned off, keep
F
COVER
OPTIONAL
DOWNDRAFT

CONTROL FUNCTIONS

BUTTON "A"
With suction motor turned on, every time the button is pressed the motor speed will
be reduced of one step.
BUTTON "B"
With the downdraft completely removed, the suction motor can be turned on and/or
off.
Hood with LED lighting: With the downdraft extracted, each press of the button, in
sequence: turns on the motor at the second speed, turns on the lights, turns off the
motor, turns off the lights.
BUTTON "C"
With suction motor turned on, every time the button is pressed the motor speed will
be increased of one step. At the 4th motor speed (intense) after 5 minutes the 2nd
speed is automatically set.
BUTTON "D"
By pressing the button once, the downdraft is completely extracted.
If the button is pressed while the downdraft is moving, the downdraft automatically
stops. To restart the movement, it is necessary to press button "D" or "E".
BUTTON "E"
By pressing the button once, the downdraft returns in completely.
If the button is pressed while the downdraft is moving, the downdraft automatically
Fig. 3
button "F" pressed for 3-8 sec. The remote control learning
is indicated with the flashing led. If, within one minute there
is a valid remote control code (sent by pressing any button
of the remote control), the led will be on continuously for 3
seconds and then it will turn off, indicating the proper
learning.
EN -10