Battery Installation - Waferlock C760 Manuel De L'utilisateur

C760
Smart Cylinder
User Manual
www.waferlock.com
Parts list for the C760 Smart Cylinder
■
Electronic Cylinder x 1
■ Inner Knob x 1
■ Inner Knob Screw x 1
■ Programming Card x 1
■ Battery x 1 ( CR2 )
■ M5 Screw x 1
■ L Shape
Hexagon Key x 1

Battery Installation

1
Remove the outer cylinder knob (Pull it out
forcefully), and insert a CR2 battery.
2
Tighten the screws anti-clockwise with the
hexagon key.
1
Einbauskizze
Installation Diagram
1
Insert the electronic cylinder through the door
into the correct position after aligning the cam
flush with the cylinder body.
Cam
2
Tighten the M5 screw fully.
3
Insert the inner knob accurately until it reaches
the correct position based on your measured
thickness. Tighten the screw fully with the hexagon
key. (The inside knob of the C760 is adjustable.)
Battery Cover
2