Use; Cleaningand Maintenance; Safety Instructions; Daily Maintenance - Casselin CPASPMIP Mode D'emploi

5.2 Use

WARNING
The setting up of the device installation and maintenance should only be carried out by professionals.
• Do not leave the appliance running without watching it.
• During use, your hands must be dry.
• Do not move or tilt the device during operation.
MANUAL
COMMISSIONING
The device must be completely removed from its packaging. All guards must be fully
withdrawn. Place the appliance on a solid, flat surface Never put the griddle on a flammable surface.
Do not install this device near open fires or other heating devices.
The electrical cable must be protected to at least 16 Amps. The device must be plugged directly into a wall
outlet. Using a power strip will trip the device.
Heat the unit for 20 minutes until all the smoke and smell are dissipated.
Switch off and unplug the appliance, then use hot soapy water to clean the plates in
stainless steel. NEVER use cold water on the stainless steel plates because you risk causing a shock
thermal.
USE
Plug in the device, once plugged in the red light comes on.
Turn the temperature adjustment knob. The green light comes on The temperature can be included
between 60° and 300°C.
We recommend that you use this device at a maximum temperature of 250°C. It varies according to the
types of food to be cooked.
In 10 minutes, the temperature of 250°C is reached. Once the desired temperature has been reached, the
indicator
green goes out. When the temperature decreases, the device starts heating again and the green light turns
on again until the correct temperature is reached.
REMARK
The appliance is equipped with a safety system in case of overheating. In case of tripping, disconnect
appliance and let it cool down. If this protection system activates regularly, it is
imperative to contact our after-sales service or your retailer.
After automatic shutdown, the device can only be put into operation by pressing the Reset button on the
back of the device. To do this, wait for the oil temperature to drop, then unscrew the protection
plastic by turning anti-clockwise, press the reset button then
screw the plastic protection back on.
6. CLEANING AND MAINTENANCE

6.1 Safety instructions

Any maintenance, cleaning, repair of the appliance must be done with the appliance unplugged (isolated from
all electrical sources).
The use of caustic detergents and baking soda for cleaning is prohibited. Water must not get inside the
device.
Never immerse the appliance in water or any other liquid.
Use the Casselin brand products provided for this purpose.
WARNING
The device cannot be cleaned with a direct water jet (no pressurized water jet).

6.2 Daily maintenance

EN