Test Function; App Control - Navkom Touchpad Instructions D'utilisation

DESCRIPTION AND
ATTENTION: If you forget the administrator code,
you will no longer be able to control the device and
CORRECT USE OF KEYPAD
will have to reset it.
The keypad has 10 digits and two function keys: (the
The user code can only be used for unlocking the door. It
plus), which is used for adding, and (the checkmark),
cannot be used for adding or deleting other codes. The user
which is used for code deleting and confirming or for un-
code can be deleted at any time, using the administrator
locking. The keypad is illuminated with blue backlight. The
code. The keypad can store 99 user codes.
function keys are illuminated with green backlight when a
correct code has been inserted or when a suitable function If you forget the user code, you can enter a new one, using
is being activated. Red backlight is activated when the the administrator code, or delete the entire database start
code is incorrect or when a suitable function is activated. from the beginning.
Under strong light the illumination of the keypad is poorly
visible and the keys will appear white. Should the pro- PERFORM THE FACTORY RESET
gramming of the keypad be made under strong light, it is Factory reset operation can be performed by pressing R
recommended that you shade the keypad in order to better
button on the control unit and holding it for 10 seconds.
see the illumination and the light signals. When any of the
It deletes all codes from the memory (administrator code
keys is being pressed, you will hear a short beep, which
included).
signals that the key has been activated.
If the factory reset is performed on the BBX control unit,
The keys are capacitive, and each has a sensor underneath,
the pairing of mobile phones or tablets is deleted. They
which detects a finger that has been pressed over. In order
need to be re-paired. After the reset function, all saved
to activate a key, you have to cover the entire digit with
WiFi connections in the mobile phone settings have to be
your finger, by touching it lightly and quickly. If the finger
deleted.
approaches the key slowly, it might not activate the key.
Reset the device with the app: By clicking on the field
100 different codes can be stored in the keypad. Each code
"FACTORY RESET" all codes stored in the memory, includ-
can be of arbitrary length: at least 4 digits and not more
ing administrator code, will be erased and the device will
than 16 digits. The first code that is set is the adminis-
be reset to factory settings. Connection with the mobile
trator's code. Only with this code it is possible to change
phones/devices will be lost.
the functions of the keypad and to add and delete other
After this operation, mobile phone must be paired first.
codes. There is only one administrator's code, stored in the
Reset the device with doorphone signal wire: When
keypad.
the signal wire for opening the door of the door phone is
The keypad should be used only by the means of the finger.
connected to + on the power supply for 6o sec. all codes
Do not use hard or sharp objects for typing, as they can
stored in the memory, including administrator code, will
damage the surface of the keypad.
be erased and the device will be reset to factory settings.
The first code that is enetred is the Administrator code and
Connection with the mobile phones/devices will be lost.
is the only one that can be entered at any time. Adminis-
After this operation, mobile phone must be paired first.
trator code can be changed later but one needs to know the
old one. Administrator code can be used also for unlocking.
20
EN EN

TEST FUNCTION

After each factory reset, the device remains in test func-
tion for 1 minute. During this time, any code can unlock
the door.
and keys flash green.
During this time, the
The test function is interrupted by a power outage or the
addition of codes.
Once the test function has elapsed, the device remains at
factory settings and ready for first use.
MAINTENANCE AND CLEANING
OF THE DEVICE
The device does not require maintenance. Should the key-
pad need cleaning, use a dry or slightly damp soft cloth.
Do not use aggressive detergents, solvents, lye or acids for
cleaning. Use of aggressive cleaning agents may damage
the surface of the keypad and in this case complaints will
be invalid.

APP CONTROL

Download the X-manager application to
your smartphone or tablet from Google
play or the App Store.
BEFORE THE FIRST CONNECTION, IT
IS MANDATORY TO RESTORE THE
FACTORY SETTINGS.
When the application first connects to
the keyboard: If you have several X-man-
ager devices nearby, the others that you
are not currently connecting to must be
disconnected from the power supply.
This prevents the X-manager from con-
necting to another device that we do not
currently want to connect to.
CONNECTION TO THE KEYPAD (ANDROID)
Every new keypad needs to be added in the x-manager
application, before it can be used. If more than one
device is connected to a single x-manager application, it
is important that the first connection is established with
one device at a time. The rest of the devices should not
be connected to a power supply at the time of the first
connection.
1 +
and then SEARCH icon.
Press
2
Press ''Connect'' .
3
Enter the desired device name and press ADD.
5
2
4
1
3
CONNECTION TO THE KEYPAD WITH AN
ADDITIONAL DEVICE
(ANDROID)
A SINGLE KEYPAD CAN BE CONNECTED TO MORE THAN ONE DEVICE
(X-MANAGER APP).
If we are adding an additional device, it is
necessary to turn off WiFi on already
added devices, if these are nearby, otherwise
they will try to connect and disable adding of
an additional device.
On the phone that the keypad is already connected to,
press the i icon next to the keypad name.
Two options appear on the screen:
4
QR CODE which you
Press the SCAN QR
can scan using the CODE icon on the new
new phone
phone
5
PASSWORD which
Press the ADD A
you can manually
DEVICE icon on the
enter in the new
new phone
phone
DISCONNECTING THE KEYPAD (ANDROID)
Press and hold the name of the keypad. When prompted,
confirm the disconnection.
21
EN EN