Publicité
Les langues disponibles
Les langues disponibles
English
NOTE: TWO PEOPLE ARE RECOMMENDED TO
ASSEMBLE THIS TABLE.
1. PLACE the bottom (largest) shelf frame (C) on the floor
with the five holes in facing up. SCREW the five
adjustable leveling feet (1) into the frame.
2. PLACE the CMS
®
(Cable Management System) post (D)
upright with the two holes in the top edge of the post
frame facing upward. SECURE the bottom shelf frame
(C) to the CMS
®
post with four 55mm bolts (2).
Tighten fully.
3. SECURE the middle shelf frame (B) to the CMS
four 55mm bolts (2). Tighten fully.
4. SECURE the top (smallest) shelf frame (A) to the CMS
using four 55mm bolts (2). Tighten fully.
5. ATTACH two "L" support plates (I) to the bottom sides
of the CMS
®
post (D) and bottom shelf frame (C) with
four 12mm bolts (5) for each plate. Tighten fully.
6. ATTACH triangular brackets (H) to the top front sides of
the CMS
®
post (D) and undersides of the arms of the
top shelf support frame (A) with four 10mm bolts (8)
for each plate. Tighten fully.
7. PLACE five smaller glass pads (4) onto the bottom
shelf frame (C) and two larger glass pads (3) onto the
rear of the middle shelf frame (B) as shown in Fig. 1.
8. Move the stand to the location it will occupy when fully
assembled and in use.
9. PLACE the bottom glass shelf (F), (the deepest shelf),
onto the bottom shelf frame (C) and SLIDE the edge
with the hole through the slot in the CMS
plastic T-pin (7) through the hole in the glass.
10. PLACE the middle glass shelf (E), (the second deepest
shelf), onto the middle shelf frame (B) and SLIDE the
edge with the hole through the slot in the CMS
PLACE the plastic T-pin (7) through the hole in the
glass. ADJUST the preinstalled adjustable glass pads
in the front of the shelf frame to ensure the glass
shelf is level. Do this before placing items on it.
11. PLACE the top glass shelf (G), with the two silver
discs, onto the top shelf frame (A) with the silver
discs into the holes on the top of the CMS
SECURE the shelf to the CMS
(6). ADJUST the preinstalled adjustable glass pads in
the front of the shelf frame to ensure the glass shelf
is level. Do this before placing the TV on it.
NOTE: ADJUST THE ADJUSTABLE FEET (1) UNDER THE
BOTTOM SHELF FRAME (C) TO ENSURE THAT THE
FURNITURE IS LEVEL.
®
using
®
®
. PLACE the
®
.
®
post.
®
with two 35mm bolts
Fig. 1
Fig. 3
Fig. 2
Publicité
