brondell PureSpa PS-65 Mode D'emploi page 9

6 . Connect Bidet Hose to Bidet Attachment
a . Connect open end of bidet hose to the
connection on the back side of the bidet
attachment .
7 . Turn on Water Supply and check for leaks
a . Open the main water supply valve slowly and check for leaks .
b . Wait 5-10 minutes, check again and if there are no leaks continue .
Note: if there is any leaking, check all rubber washers and make sure all water
connections are tight and secure. If necessary, you can use plumbers tape for
any leaking connections.
Step 6a
8