Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1.3. Changing the speed mode
In regular operating mode, a short press of the button «M» (Less than 3 seconds) will switch to speed mode 1,
2 or 3.
1.4. Speed information
From 0.0 to 99.9 km/h, with an accuracy of 0.1 km/h.
1.5. Odometer - Single trip mileage
The single trip mileage data returns to zero after the unit is turned off.
1.6. Odometer - Cumulative travelled mileage
From 0 to 9 999 km, the cumulative travelled mileage is updated with each new kilometer traveled. Note that
this data can be reset to zero in the seting mode, or it is automatically reset to zero when the mileage on the
meter exceeds 9 999 km.
1.7. Battery power
The display is divided into five sections (See Figure 14), each of which corresponds to 20% of the remaining
power on the battery when lit.
Note that when the battery charge approaches the minimum required to power the controller, the five battery
sections on the display start to flash.
When this low voltage indicator is lit, it means that the battery is undercharged and must be
recharged immediately.
Figure 14
7
Publicité
Table des Matières
