Optical Mode - Pure Acoustics SBW-1022 Manuel De L'utilisateur

Audio input(Aux)Connection
1. Firstly connect the soundbar to your PC, laptop, smart-phone, TV, or other audio devices by using an AUX cable
provided. Make sure that these devices have both AUX IN and AUX OUT terminals.
2. Then press the INPUT button on remote control or soundbar to switch the soundbar to Aux mode,
once the soundbar is connected in Aux mode, the screen will display "
device will play. Playback can only be controlled on your connected device.
Note:
For some computers, you may need to access the audio control panel to manually set the soundbar as
shown steps on above.
HDMI (ARC) Mode
1. The soundbar supports HDMI (ARC) with audio return channel (ARC). You can hear the TV audio through your
soundbar by using a single HDMI (ARC) cable. But on condition that your TV is ARC compliant.
2. Using a high speed HDMI (ARC) cable, connect the HDMI (ARC) connector on the soundbar to the
HDMI (ARC) connector on the TV. The HDMI (ARC) connector on the TV might be labeled differently. For
details, see the user manual of your TV.
3. When HDMI (ARC) is connected, TV sound setting in "sound output" mode should be set as <external Dolby or Auto mode>,
in addition, digital audio output mode should be set as <automatic> or <decoded output as Dolby>. When the
HDMI (ARC) cable is connected, the TV digital audio output is set as Dolby or Auto mode. Then start playing music on the TV.
4. Press "INPUT" button on the remote control or on soundbar to select
Different TV might be different setting, please refer to your TV User Manual.
5. Use the volume buttons to adjust the volume to your requirements.
6. You can also change the audio settings by using the relevant buttons on the remote control.
1. When connecting a device such as a TV/Set-top box/DVD/ game console with HDMI (ARC) cable, set the audio
output mode of the device to Dolby or Auto mode <digital HDMI (ARC) output>.
2. The TV is connected to a HDMI (ARC) port with sound bar. Different TVs might have different setup menus,
but the operation approach is the same.
3. If needs to connect set-up box meanwhile, please firstly connect the HDMI (ARC) connector and paired to the
soundbar. Then connect the set-top box.

Optical Mode

-Remove the cap of optical cable (keep the cap for the future use); check the direction of the plug. Connect the soundbar
and TV with the optical cable.
-Use this mode to play music from a TV with optical digital output on the sound bar. In TV sound settings, select the soundbar
optical connection (output for audio). When the optical cable is connected, the TV audio output is set to Dolby or Auto mode.
-The TV must have an optical digital output. Use the optical cable to make the connection as follows:
1. Connect the optical cable to the optical digital output of your TV.
2. Connect the optical cable to the optical digital input of your soundbar.
3. Switch on the TV set and the soundbar. Set the connected TV to "Dolby or Auto mode".
4. Start playing on the TV.
5. Press "INPUT" button on the remote control or on the soundbar to select
6. Use the volume buttons to adjust the volume to your requirements.
7. You can also change the audio settings by using the relevant buttons on the remote control.
1. When connecting a device such as a TV/Set-top box/ DVD/ game console with optical cable, set the audio output
mode of the device to Dolby or Auto mode (digital optical output).
2. Do not bend the optical cable, otherwise the cable inside will be damaged.
" . And the music on your connected
- HDMI (ARC) mode.
- OPTICAL mode.
12