Publicité
Les langues disponibles
Les langues disponibles
NOTICE DE MISE EN ŒUVRE ET D'INSTALLATION
INSTRUCTIONS FOR INSTALLATION
Assembly of the clamp body under crossarm by bolt BH 14x25/25
1.1
Position the BH 14x25/25 screw in
the clamp body fixing hole.
Assembly of clamp body on wooden pole with a through bolt (BH 14x225/25 + PC 14)
2.1
Position the body of the clamp over
the threaded rod of a through bolt
already in place, ensuring that the
nut fits into the body of the clamp.
The curved washer must fit into the
notches of the body.
Assembly on a metal, concrete or composite pole with a band of strap 20 x 0.7mm
3.1
Prepare a strip of strap 20 x 0.7mm
in length suitable for the pole.
SM-CI - 450 rue Jacquard - Z.I. La Madeleine - BP 3127 - 27031 EVREUX Cedex - France
Tél. : +33 (0)2 32 23 35 60 – www.malico-telecom.com - www.sm-ci.com - infos@sm-ci.com
Pince de suspension
Suspension clamp
PST
1.2
Position the clamp body under the
crossarm by inserting the screw in a
crossarm hole diameter
15mm, with a minimum space of
80 mm with another adjacent clamp.
Wrong installation
3.2
Insert it into the two slots provided
for this purpose in the clamp body.
MO10090418
14/09/22 - B
S. ESMAN
3/4
1.3
Firmly tighten the nut on the top of
the crossarm.
2.2
Screwed a new nut onto the through
bolt and tighten securely. Hold the
clamp body in a vertical position.
3.3
Tighten the strap on the pole with
sufficient tension to prevent any
movement of the clamp.
Publicité
