Aux Mode - Stereoboomm 500 Plus Manuel D'instructions

You should pair the STEREOBOOMM 500+ with your
Bluetooth® music device once before using it.
Press the ON/OFF Button (1) for 3 seconds. The blue LED
indicator will start flashing and you will hear a melody
indicating that the STEREOBOOMM 500+ is entering
pairing mode and is starting to search for available
Bluetooth® devices. The STEREOBOOMM 500+ is
now ready for pairing. → Let your Bluetooth® music
device search for other Bluetooth® devices (please refer
to the manual of your Bluetooth® music device for more
information). → Select
list with found devices on your Bluetooth® music device.
You will hear a short beep. → The blue LED indicator
will stop flashing.
Once the STEREOBOOMM 500+ is successfully paired,
you can use it to listen to your favorite music wirelessly in stereo.
Note!
The STEREOBOOMM 500+ will automatically reconnect
to the last connected device when the STEREOBOOMM
500+ is turned ON again.
'Stereoboomm500+' out of the
In case your Bluetooth® music device does NOT reconnect
automatically with the STEREOBOOMM 500+ you can
reconnect manually with your Bluetooth® music device
(please refer to the manual of your Bluetooth® music
device for more information).
CONNECTING THE STEREOBOOMM 500+ WITH
A NON-BLUETOOTH® MUSIC DEVICE
→ NON-Bluetooth® music devices are music devices
provided with a 3.5 mm jack socket (e.g. a regular MP3
player) or external music storage devices like TF/SD-cards.

AUX MODE

You can also play music from a NON-Bluetooth® music
device on the STEREOBOOMM 500+ by using the 3.5
mm jack cable (12). Plug the jack cable (12) into the audio
socket (9) of the STEREOBOOMM 500+. Plug the other
end of the jack cable (12) into the audio socket of your
music device.