Vertical Ironing; Dry Ironing - POLTI Vaporella NEXT VN18.65 Manuel D'instructions

) of Polti Vaporella Next (5) is on and constant
and the iron heating indicator light (4) is off.
3.3 Press the steam button on the iron
(7) to make the steam come out from the
holes in the soleplate. Start ironing the gar-
ments. Releasing the button, the flow stops.
When first using the steam, there may be
some drops of water leaking out of the
plate, this is due to imperfect thermal stabi-
lization. We therefore recommend that the
first jet of steam be directed onto a cloth.
The heating indicator light turns on and off
during use. This indicates that the electri-
cal resistor has started to work to keep the
temperature in the iron steady: continue
ironing normally.
WARNING: Do not place the hot iron di-
rectly on any surface. Polti Vaporella is
equipped with an iron rest mat with soft
non-slip inserts designed to resist high
temperatures.
4. STEAM PULSE FUNCTION
(only for models POLTI VAPORELLA
NEXT VN18.65 - VN18.45 - VN18.40 -
VN18.35 - VN18.30 - VN18.25 - VN18.20)
The STEAM PULSE function (intermittent
steam) can be activated for quick and easy
ironing, by double-clicking on the steam but-
ton of the iron (7). The intermittent steam
penetrates further into the fabric, speeding
up and improving the ironing. In this mode,
the iron will alternate between emitting steam
and not emitting steam.
To deactivate this function, press the steam
button of the iron again.
To reactivate, repeat the procedure from the
beginning.
The Steam Pulse function is also recommend-
ed for vertical ironing.
5.

VERTICAL IRONING

It is possible to use the iron vertically to re-
move creases from fabrics and/or to freshen
up the fibres, eliminating possible residual
odours.
Hold the iron in a vertical position, press the
steam button (7), and if permissible based on
the type of fabric, touch the fabric lightly with
the plate.

6. DRY IRONING

Make sure that section 1 has been followed,
adjusting the temperature of the iron (6) to
the lowest temperature as in section 2. Con-
tinue with the ironing without pressing the
steam button on the iron.
During dry ironing, take care not to push
the steam release button on the iron since
some water drops can come out from the
soleplate.
7. ECO FUNCTION
(only for models POLTI VAPORELLA
NEXT VN18.65 - VN18.45 - VN18.40 -
VN18.35 - VN18.30)
With the ECO function, Polti Vaporella Next
automatically sets the steam pressure for sig-
nificant energy savings and at the same time
ensures excellent performance for ironing
all fabrics, including the most resistant ones
(cotton / jeans / linen).
To activate or deactivate the ECO function,
just press the ECO button on the appliance
(8).
8. TURBO FUNCTION
Using the TURBO function, you can quick-
ly and easily iron even the heaviest fabrics,
smoothing out the most stubborn creases in
one go.
Do not use this mode for ironing synthetic,
silk and wool clothing.
To activate this function, just press the TURBO
button on the appliance (9). The Turbo func-
tion has a maximum duration of 10 minutes.
To reactivate it just press the TURBO switch
again.
9. 360° FLUID CURVE
TECHNOLOGY PLATE
The innovative multidirectional rounded sole-
plate with a scratch-resistant covering allows
for 360° ironing. The pointed tip reaches the
most difficult areas and the concentration
of steam in this area smooths even the most
stubborn creases. The channels distribute the
steam evenly, making the iron slide more easi-
ly for faster ironing with less effort.
10. AUTOMATIC SWITCH-OFF
After 10 minutes without use (calculated from
the last operation carried out on the appli-
ance), the boiler and the iron switch off auto-
matically. The indicator light
To re-activate the appliance, press the switch
.
15
flashes.