Walimex Pro AIR 355 Mode D'emploi page 5

D
Wir freuen uns, dass Sie sich für ein Walimex pro Produkt aus dem Hause
WALSER entschieden haben und wünschen Ihnen viel Freude mit unserem
Produkt.
WALSER bietet seinen Kunden mit den Marken Walimex pro und Mantona
preiswerte, ausgewählte und exklusive Produkte für kreative Foto- und Vi-
deografie direkt vom Her steller.
Dabei profitieren sowohl ambitionierte Anfänger wie auch Profis von unse-
rem Produkt-Know-How und einem ausgezeichneten Service. Ob Fragen
zu tech nischen Details oder zu Einsatzgebieten unserer Produkte – mit
einer individuellen Fachberatung durch ausgebildete Fotografen unter-
stützen wir unsere Kunden auch nach dem Kauf in allen Aspekten rund um
unser Portfolio.
Teilen Sie unsere Begeisterung für professionelle Foto- und Videografie
und lassen auch Sie sich von unseren Produkten inspirieren!
Ihr Team von WALSER
EN
We are pleased that you have chosen a Walimex pro product from WAL-
SER and wish you lots of pleasure with our product.
With the brands Walimex pro and Mantona, WALSER offers its customers
inexpensive, selected and exclusive products for creative photography
and videography directly from the manufacturer.
Both ambitious beginners and professionals benefit from our product
know-how and excellent service. Whether you have questions about
technical details or areas of application for our products - with individual
expert advice from trained photo graphers, we support our customers in
all aspects of our portfolio even after the purchase.
Share our enthusiasm for profes sional photography and videography and
let yourself be inspired by our products!
Your team from WALSER
WALSER GmbH & Co. KG
Senefelderstrasse 23
86368 Gersthofen
Germany
info@walser.de
www.walser.de
Made in China
8
By purchasing this product you have acquired a high-quality, versatile and
practice-oriented lamp stand / studio stand with long-term quality. The Walimex
pro AIR 355 offers a high level of comfort and additional safety thanks to its air-
damped elements, which enable slow and gentle lowering even under load. The
lamp stand has good stability in its stand class and offers enough reserves for your
equipment with its high load capacity and its great working height.
We hope you enjoy using our product.
Your team from WALSER
Adjusting of the light stand
Loosen the locking screw of the light stand angle adjustment (5). Pull the stand
legs (9) outwards and press the stand star (6) downwards. This spreads the
legs. Set the desired angle of the legs. Fix the legs by tightening the locking
screw of the light stand angle adjustment (5) again. Note that the base of the
telescopic center column (11) should not touch the ground as this will affect
the stability of the stand. This stand features an adjustable base for various
purposes. For all purposes of this manual, it is to be kept locked in the lower
position.
Proceed in reverse order when folding the stand.
WARNING!
Risk of squeezing fingers with the struts of the tripod legs (8).
Height adjustment
The light stand is equipped with a telescopic center column that can be
extended.
The locking clamps of the center column (3) are fixed by the locking fastener
screws (4). To adjust the height of the light stand, loosen the locking fastener
screws (4). Set the desired height and tighten the locking fastener screws
(5) again. Press the center column elements down to check that all locks are
fixed correctly. The stand is now ready to use.
Installation of equipment on the light stand
Using the adapter on the top, you can attach devices such as studio flashes,
LED lights, softboxes, poles etc. to this stand. The locking screw must be
tightened so that it holds the thinner part of the inserted adapter pin, see
fig. A. This prevents accidental release of the mounted equipment. On the
upper end of the mounting adapter (1) a 1/4 inch thread can be used. You
can also attach suitable equipment here.
Recommended accessories for increased stability
When using heavy equipment with large extension height, we recommend
additional accessories for stabilization. For this we recommend the use of
special sandbags or weights. The use of safety lines or ropes is also recom-
mended for extreme working heights. These measures guarantee the opti-
mum stability of your tripod even under adverse conditions.
You will find suitable accessory articles in our webshop www.foto-walser.de
Art.-No. / Name
• 15537 Walimex pro sand bag
• 15876 Walimex stand weight 3 kg
• 13739 Walimex weight for rods and boom stands 4,4 kg
• 12720 Walimex pro Tripod Wheels Pro, set of 3
• 21636 Walimex pro Tiltable Umbrella Mount with Spigot Socket
9