BOLERO DRESSCODE 7200 INVERTER Manuel D'instructions page 62

ENGLISH
QuickStart
Before washing
Plug the appliance to a power supply.
Open the tap.
Load.
Close the door.
Add detergent.
Fig. 13.
Note: Detergent must be added in "case I" only after selecting pre-washing for machines with
this function.
Washing
Turn the device on.
Turn the knob to select the desired programme.
Select function or use the default one.
Press Start.
Fig. 14.
Note: If any of the default options is selected, step 3 can be skipped.
After washing
The appliance will beep, or the display will show "End".
Using the washing machine
Before each washing
The washing machine should be operated within a temperature range of 0-40 °C. If used
under 0°C, the inlet valve and draining system may be damaged. If the machine is placed or
operated in rooms at 0 °C or below, it should be transferred to normal ambient temperature
to ensure the water supply hose and drain hose are not frozen before use.
Check the labels and the product instructions when using detergent before washing. Use
62