Publicité
Les langues disponibles
Les langues disponibles
10. TO ORIENT WALLWASH UNITS:
Note the location of the wallwash kicker. (Fig. 6) The
kicker needs to be facing the wall on the opposite side
of the fixture from the wall.
If the cylinder needs to be rotated:
Loosen the thread clamp screw to unlock the fixture
assembly from the running threads. Ensure that the
fixture is threaded onto the running thread such that
the canopy is very close to the ceiling. Find the
wallwash kicker and face it towards the wall by
rotating the cylinder LESS THAN one full turn on the
running threads. Once the wallwash kicker is on the
opposite side of the fixture from the wall, tighten the
thread clamp screw to lock the fixture assembly onto
the running threads. (Fig. 4)
WARNING: Failure to tighten the thread clamp
screw to lock the fixture assembly onto the
running threads may allow the fixture to turn and
fall!
SIDE VIEW
WALLWASH
KICKER
Fig. 6
701 Millennium Blvd • Greenville, SC 29607
With representatives offices in principal cities throughout North America.
Copyright
2021 06/25/21
,
revision, All Rights Reserved - Printed in U.S.A.
WALLWASH
KICKER
FIXTURE
WALL
KEEP THESE INSTALLATION INSTRUCTIONS!
Part No...........................................
93052567
Page 3 of 6
Publicité
