Table des Matières

Publicité

General Guidelines

Please read the following instruction carefully and use the product accordingly.
Ÿ
Please keep this manual and hand it over when you transfer the product.
Ÿ
This summary may not include every detail of all variations and considered steps. Please contact us when
Ÿ
further information and help are needed.
Notes
Personal injury and/or damage to product may occur if products are used outside of their intended purposes
Ÿ
and/or if products have been changed/modified from their original design. The product must be assembled and
used in accordance with the provisions of the manual. The seller does not assume any responsibility or liability
with respect to any damage caused by incorrect assembly or improper use.
During assembly, first loosely align all screws with the corresponding pre-drilled holes and then tighten the
Ÿ
screws one by one.
The item is only intended to be used indoors. Do not place it in a damp environment for extended periods of
Ÿ
time to prevent mildew.
Periodically inspect screw tightness while the product is in use. If necessary, re-tighten to ensure structural
Ÿ
integrity.
It is recommended that two people participate in assembly.
Ÿ
Warnings
Keep children away when assemble the product. Small parts are included in the package, It may be fatal if
Ÿ
swallowed or inhaled.
Children are not allowed to climb or stand on the product to avoid personal injury caused by the product tilting or
Ÿ
tipping over.
To avoid the potential dangers of suffocation, please keep all parts and packaging (film, plastic bags, foam, etc.)
Ÿ
away from babies and children.
Keep the product away from sharp objects or corrosive chemicals to prevent damage to the surface.
Ÿ
The maximum static load capacity of the top surface is 30 kg (66 lb) each. Please do not place overweight items
Ÿ
on the product.
Einleitung
Bitte lesen Sie die folgende Anleitung aufmerksam durch und verwenden Sie das Produkt sachgemäß.
Ÿ
Bewahren Sie diese Anleitung gut auf und händigen Sie sie bei Weitergabe des Produkts an Dritte ebenfalls mit
Ÿ
aus.
Aus Gründen der Übersicht können nicht alle Details zu allen Varianten und denkbaren Montagen beschrieben
Ÿ
werden. Wenn Sie weitere Informationen und Hilfe benötigen, kontaktieren Sie uns bitte.
Hinweise
EN
DE
2

Publicité

Table des Matières
loading

Table des Matières