NewAge Products 60846 Guide D'installation page 5

Installing LED Lights
Remove backing paper from one side of
1
double sided tape (1) and apply to clear
plastic clip (2). Attach plastic clip to LED
Light (3), and remove remaining backing
paper(4).
1.
3.
Continue and attach connector cables to
adjoining LED Lights. The LED light with
the ON/OFF switch is the control unit and
3
the adapter has to be connected to this
light unit first.
5
2.
4.
Install light under the cabinet by applying
2
firm pressure.
Attach adapter to LED light unit with
4
control switch and plug into outlet.