NewAge Products 60846 Guide D'installation page 4

Connecting the LED Lights
Parts required
LED Light(s)
For LED Lights to work correctly, the
adapter cable (A) must be connected to
1
the end with the on/off switch, for the LED
Light to be operational.
ON/OFF Switch
NOTE: For Wall Switch Operation
If you are using a switch controlled power outlet to operate the LED Lights, the power adapter
cord needs to plug into the end opposite the ON/OFF switch.
4
Power Adapter
A
A
Connector Wire
Use connector cords (B) to connect
2
additional lights. Up to 4 LED lights can be
connected to one Power adapter cord(A).
Double Sided
Plastic Clip
Tape
B