Base Installation - Beper RI.075 Manuel D'instructions

Tower heater Use instructions

BASE INSTALLATION

USAGE
1. Please check before you use:
A: The heating wire and electric wire cannot be broken.
B: Please do not use the socket lower than 10A for fear of any accident.
2. Use the fan heater on the flat place to avoid being toppled.
"": ON, "": OFF.
1, Press "ON/OFF"; "power on and fan working" or "power off"
2, Press "1000W": one heating element on or off
3, Press "OSC": "Swinging" or "Swinging off"
Fixed connect the base A and B.
Fixed connect the base to the bottom of ap-
pliance.
Take out the base plate. Fix the pedestal and
heater together, make screw hole in the same
vertical, then tighten with four screws
10