Pinegreen Lighting CL-SML2ST Instructions D'installation page 2

Installation Instructions: CL-SML2ST 1000 Lumen Dual Head Battery Operated Security Light
INSTALLATION-1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
RECOMMENDED INSTALL HEIGHT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- 8-10 feet above the ground.
- At such a height, the motion sensor will provide detection distance
of up to 40'.
- The motion sensor is the most sensitive as a person or object
moves parallel to the sensor head.
- The motion sensor is the least sensitive if a person or object
moves directly at the sensor head.
PLEASE NOTE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1. The maximum detection distance is 40'. The maximum distance can change based on the ambient temperature and
relative humidity (Maximum distance is based on an ambient temperature of 77 degrees Fahrenheit and relative humidity
between 30%-80%).
2. Do not mount the fixture near a heat source like an air conditioner, vent or furnace exhaust, or in a direction facing and
reflective object or nearby light source.
Battery is located in the battery housing under the solar panel.
Select the OFF position on the light prior to opening the battery
5 housing. Remove the two screws to reveal the battery.
Prior to using your solar motion light, initial charge is needed
and it should be done in the OFF position for at least three
sunny days. After the third day, your included battery will be
enough power for operation of solar motion light. Place the
light in the AUTO position: The light will illuminate for 20s when
motion is detected.
If you have questions or missing parts, please contact our customer care at 1-888-745-4837
NOTE: Recommended
Tools: Power Drill,
Phillips Screwdriver
Use a power drill (not included) two 1/4 drill
holes on the chosen surface. Fasten the
motion light onto the wall with 2 wall plugs
& 2 screws.
Installation is completed.
WARNING:
RISK OF ELECTRICAL SHOCK.
TO AVOID ELECTRICAL SHOCK, MAKE SURE TO TURN
OFF THE MAIN POWER SOURCE OR DISCONNECT POWER
DURING THE INSTALLATION OR SERVICE
OF THIS PRODUCT
IMPORTANT TIP:
Ensure your motion light is placed
where exposes to optimized
sunlight.
Be aware of objects such as trees
or property overhangs that may
impede the panel's ability to gen-
erate a charge.
EYES:
• DO NOT look directly at the LED lights.
• DO NOT remove the LED lights
protective covering.
This product has a two-year warranty from the date of
purchase. This guarantees against failure due to factory
defects, whether caused by materials or workmanship.
The warranty is non-transferable and only pertains to the
original purchaser. Proof of purchase is required for any
repair or replacement, so please keep your proof of purchase receipt.
This warranty does not cover normal wear and tear or damage due to
misuse. Misuse of this product includes but is not limited to:
• Using outdoors in extreme weather conditions.
• Opening the product's housing.
• Any attempts to update, remodel or fix the unit yourself.