Pinegreen Lighting CL-SML2ST Instructions D'installation

Installation Instructions: CL-SML2ST 1000 Lumen Dual Head Battery Operated Security Light
WARNING:
- Your motion light is not a toy. Keep it out of reach from small children.
- Your motion light must be installed outdoors. Direct sunlight is needed for
- If using a step ladder, you may require a second person to help install the solar motion light.
- Prior to installation, lay out all components and check against the part list section in this manual.
- Never look directly into the solar motion light when illuminated.
PRE-INSTALLATION
1. Before assembly compare package contents with list to make sure all
parts are present.
2. If removing an existing fixture, shut off power at circuit break before removal. If you
are unfamiliar with electrical installations, it is recommended to have a qualified
electrician complete your installation.
3. Select suitable location that can support the weight of the fixture.
Determine mounting method (page 2).
HARDWARE
Please read these instructions thoroughly prior to installation, then store in a safe place for future reference.
BATTERY REPLACEMENT INSTRUCTIONS
When replacing the battery, be sure to:
• Use rechargeable battery only. Battery specification is Li-ion 3.7V 1800 mAh, 1pc is required.
• Match the replacement battery specifications with the battery that have been removed.
• Observe the correct polarity (+ and -) when installing the replacement battery.
• IMPORTANT: Dispose of the Lithium ion battery in accordance with local, state and federal regulations.
CARE & MAINTENANCE
• The solar motion light should be cleaned with a damp cotton cloth on a regular basis. This will ensure optimal
performance and battery charging.
• Never let any abrasive material come into contact with the light.
• Your fixture is made from quality materials that will last many years with minimal care. You may want to periodically
clean the surface of the fixture.
• Use a mild, non-abrasive glass cleaner. Do not use any solvents or harsh cleaning agents.
• Use a soft, non-abrasive cloth.
• When cleaning, make sure that the power is off. Do not spray liquid cleaner directly onto LED's driver, or wiring.
If you have questions or missing parts, please contact our customer care at 1-888-745-4837
light to operate properly.
1 x Rechargeable Battery (Included Inside Product)
WARNING:
RISK OF ELECTRICAL SHOCK.
TO AVOID ELECTRICAL SHOCK, MAKE SURE TO TURN
OFF THE MAIN POWER SOURCE OR DISCONNECT POWER
DURING THE INSTALLATION OR SERVICE
OF THIS PRODUCT
1 x Motion Light
2 x Mounting Screws 2 x Wall Anchors