Castel MAYLIS MP Mode D'emploi page 11

MP
INSTALLATION
Wall mounting
Hang the box with 2 screws Ø4,2mm max.
PROGRAMMING
The station is programmed with a PC connected to the "maylis" network or with one of the MP stations on the network.
For the MP item, you need to program:
•
The type of half duplex voice
•
The type of direct call for F1 to F11
•
The address of the extension(s) to be called
•
The type of NO or NC hold for relay 1 of the station
Other functions can be programmed for the buttons and the relay (e.g. the relay can be programmed as a horn). It is
closed on call and opens as soon as communication is established. (See SYSTEM documentation "maylis" ref.
600.0090).
Technical data sheet n° 600-0091E www.castel.fr
FR
EN
Page 11 / 12