Technical Specification - Trevi OM 3540 D Mode D'emploi

OM 3540 D
FAHRENHEIT/CELSIUS
Press the DOWN °C/°F button (1) to select Fahrenheit or Celsius
temperature readings
SET TIME ALARM
Press the ALARM button (6) once to enter Alarm 1 Mode. The
letters AL1 will show in the right corner display.
1. Hold the ALARM button (6) for 3 seconds to enter alarm time
set mode.
2. Press the UP (2) or DOWN °C/°F (1) buttons to adjust values.
3. Press the ALARM button to confirm and move to the next
item.
Alarm Time setting order: 1. Hours, 2. Minutes 3. Snooze time
(1-59 min).
4. ALARM 2 setting is same as alarm 1.
5. When alarm on, if you don't press any key to stop the alarm,
it lasts for 1 minute. Or you can press any key to stop the
alarm.
5.1 0-10 seconds with BI only;
5.2 11-20 seconds with BIBI sound;
5.3 21-30 seconds with BIBIBIBI sound,
5.4 after 31 seconds with continuing BI sound.
ACTIVATE/DEACTIVATE TIME ALARM
• At normal mode, press MODE key (3) one time to turn On/
Off the alarm 1, the icon would appear or disappear.
• At normal mode, press MODE key (3) two time to turn On/
Off the alarm 2. Press the MODE key (3) three times the icon
and are all disappear. All the alarms are off.
SNOOZE (SILENCES ALARM TEMPORARILY)
• You can set the snooze from 1-59 minutes.
• When alarm on, the icon
SNOOZE (5) to go into the snooze mode. Icon would appear
in the display.
• When snooze on, icon
• In snooze mode, press any button to stop alarm for one day.
Note: The alarm will sound for 2 minutes and then shut off
completely.
SNOOZE (SILENCES ALARM TEMPORARILY)
When the icon is displayed, replace batteries in the clock.
4
DIGITAL WALL CLOCK
or would flashing, press
would flashing.

TECHNICAL SPECIFICATION

Power Supply: ....................3 "AA" size batteries, 1,5V
Temperature Range: ...........+14 to +122 °F (-10 to +50 °C)
Dimensions: .......................460 x 325 x 30mm
USERS INFORMATION pursuant to Legislative Decree No.
49 of March 14, 2014
"Implementation of Directive 2012/19/EU on Waste Electrical and
Electronic Equipment (WEEE)"
This wheeled bin symbol on the product indicates that at the end
of its life must be collected separately from other waste. The user
must, therefore, take the remote control integrates the essential
components that got to its life to the appropriate differentiated
collection centers for electronic and electro-technical waste, or
return it to the dealer when purchasing a new appliance of equivalent
type, in terms of one to one, or one to zero for equipment having
longer side of less than 25 cm. Appropriate separate collection
for the decommissioned equipment for recycling, processing
and environmentally compatible disposal helps prevent negative
impact on the environment and human health and promotes
recycling of the materials making up the product. Illegal dumping
of the product by the user entails the application of administrative
sanctions stated in Legislative Decree n. Legislative Decree No.
49 of March 14, 2014.
ENGLISH