Style selections 9005SSMV Instructions De Montage page 4

ASSEMBLY INSTRUCTIONS
1.
Fasten mounting brackets (BB) to shelf (A) and towel
bar (B) with hex-head screws (AA).
2.
Hold the unit at the desired position on the wall.
NOTE: Make sure the unit is level.
Mark mounting points on wall through holes in the
mounting brackets (BB). Hammer wall anchors (CC) into
wall, unless mounting screws (DD) will go directly into a
stud.
NOTE: Do not use a wall anchor if mounting screw will
be going into a stud.
Wall anchors (CC) should be oriented with the flat side
horizontal. Place unit against wall, lining up holes in wall
and holes in mounting brackets (BB). Complete mounting
by tightening mounting screws (DD) into studs or wall
anchors (CC).
Printed in China
AA
Hardware Used
AA
Hex-Head Screw
BB
Mounting Bracket
CC
Hardware Used
CC
Wall Anchor
DD
Mounting Screw
3
Fig. 1
A
B
BB
Fig. 2
DD
x 4
x 2
BB
x 4
x 4
IS9006-I5