PILA LH24L40KU Guide Rapide

CAUTION
•
To reduce the risk of death, personal injury or property damage from fire, electric shock, falling parts, cuts/abrasions,
and other hazards read all warnings and instructions included with and on the fixture box and all fixture labels.
•
Before installing, servicing, or performing routine maintenance upon this equipment, follow these general precautions.
•
Commercial installation, service and maintenance of luminaires should be performed by a qualified licensed electrician.
•
For The installation: If you are unsure about the installation or maintenance of the luminaires, consult a qualified
licensed electrician and check your local electrical code.
•
To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
•
Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation.
CAUTION
•
Turn off electrical power at fuse or circuit breaker box before wiring fixture to the power supply.
•
Turn off the power when you perform any maintenance.
•
Verify that supply voltage is correct by comparing it with the luminaire label information.
•
All wiring connections should be capped with UL approved wire connectors.
CAUTION
•
Avoid direct eye exposure to the light source while it is on.
•
Account for small parts and destroy packing material, as these may be hazardous to children.
•
Risk on burn. Disconnect power and allow fixture to cool before changing bulb or holding fixture.
Green ground screw provided in proper location. Do not relocate.
NOTICE:
Minimum 90° supply conductors.
NOTICE:
NOTICE: Specifications and dimensions subject to change without notice.
Suitable for Dry or Damp location
NOTICE:
General Wiring Diagram
CAUTION: Turn off electrical power at fuse or circuit breaker box before wiring fixture to the power supply.
Linear Highbay
LH24L40KU
911401842481