Step 1-C: Mount Nmo Outside Antenna - weBoost DRIVE 4G-X FLEET Guide De L'utilisateur
Masquer les pouces
Voir aussi pour DRIVE 4G-X FLEET:
- Manuel de l'utilisateur (16 pages) ,
- Mode d'emploi (24 pages)
Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
______
Step 1-C: Mount NMO
Outside Antenna
Before attaching the antenna, apply a thin layer of silicone
grease to the threads, only, to the NMO mount and to the
o-ring on the antenna. Screw the antenna onto the NMO
mount and hand tighten into place.
NOTE: DO NOT apply silicone grease to the antenna pin contact surface.
apply silicone grease
DRIVE 4G-X FLEET PROFESSIONAL VEHICLE SIGNAL BOOSTER KIT
screw on
NMO Antenna
hand tighten and make sure
gasket is touching vehicle
surface
5
Publicité
Table des Matières
Dépannage
