Step 4: Connect Coax Cables To Booster - weBoost DRIVE 4G-X FLEET Guide De L'utilisateur

______
Step 4: Connect Coax Cables
To Booster
Connect the cable from the NMO Outside Antenna to the port
labeled "Outside Antenna" on the Drive 4G-X booster.
NOTE: Bracket can be used to fasten booster in a specifi c location if desired.
from NMO Outside Antenna
Connect the cable from the 4G In-Vehicle Antenna to the port
labeled "Inside Antenna" on the booster.
8
PROFESSIONAL VEHICLE SIGNAL BOOSTER KIT DRIVE 4G-X FLEET
from Inside Antenna