Operation - Lacor HOME 300 W Conseils D'utilisation Et D'entretien

1.- Place the foods that you wish to mix into a container.
2.- Set the speed regulator (2) to "0" and insert the beater rods (6) or dough rods (7) in the
holes on the blender.
NOTE: For best results, the kneading accessory (7) which includes a metal washer on its shaft
must be installed on the left side as shown in the image.
3.- Connect the power cable to a 220-240V/50-60Hz outlet.
4.- Put the blender inside the container and select the speed with which you would like to work.
Change the speed as many times as you like.
5.- Use the TURBO (3) button to work at top speed for a determined amount of time, whenever
you want.
6.- Once the process has finished, set the speed (2) to "0" in order to turn off the motor.
7.- Extract the egg beaters by pressing the remove whisk button (1) that has been designed for
this purpose.

OPERATION

33