Storkcraft 06550-4-BF Serie Mode D'emploi page 3

Attach the back frame (B) to base (A)
using bolts (2) and washer (3). Use
Allen key (5) to fasten bolts.
Note: Leave bolts loose to allow easier
assembly of arms in following steps.
2.1 Attach the right arm assembly (C-R) to back
frame (B) using bolt (1), washer (3) and barrel
nut (4). Insert barrel nut (4) into the hole
underneath the armrest as per DETAIL B. Use
Allen key (5) to fasten bolts.
NOTE: REGULARLY CHECK
AND RETIGHTEN ALL
ASSEMBLY BOLTS.
DETAIL A
2
3
STEP 1
5
2
3
STEP 2
2.2 Attach the right arm assembly (C-R) to the
base (A) using bolts (2) and washer (3) as per
DETAIL A. Use Allen key (5) to fasten bolts.
assembly (C-L).
3
GLB
DETAIL B
3
1
4
GLB