Table des Matières
Publicité
10.0 DÉTECTION AUTOMATIQUE / MISE EN MARCHE AUTOMATIQUE
All inputs on the Sound Hub have auto sensing and will automatically
activate the Sound Hub and paired speakers when a signal is detected. This
will turn on the system and activate the correct input, if the system is in
standby, or just activate the correct input if the system is already On.
• Bluetooth, RCA In, Coaxial In and Optical In, all activate when an audio
signal is detected.
• Optical In (TV) activates when the carrier light in the optical cable is
turned on.
Auto sensing does not allow one input to override another input that has an
active signal.
Auto sensing will activate an input that has an audio signal if the current
input is no longer receiving an audio signal. So, if your CD Player is playing
music and you manually select the TV input, the CD Player input could in
some situations be auto selected when you turn off your TV. To avoid this,
always turn of any playback before manually selecting another input.
The Sound Hub and the speakers will automatically power off after 30
minutes with no audio signal.
Note: The mini-jack (AUX In) connector does not have Auto sensing.
14
Auto sensing can be deactivated leaving only manual source select:
1. Turn on the Sound Hub.
2. Press and hold the Source Select button on the front of the Sound Hub.
3. Turn the volume control to change the setting.
4. Release the Source Select button to save the new setting.
Appuyez longuement
Publicité
Table des Matières
