Publicité
Les langues disponibles
Les langues disponibles
Installation Instructions
Installation
1-1
Disconnect Negative (-) battery cable from the battery
sensor terminal. Hold the battery sensor carefully when
removing the 10mm nut.
1-3
Remove clip from fog cover blank
Squeeze six (6) tabs and push fog cover blank forward to
release
Description
2020 Outback Fog Lamp Kit
Part Number: H451SAN100
Description: Fog Light Kit, Outback
1-2
Remove three (3) clips and pull down the fender liner.
Free fog lamp harness connector from the breakaway
tape.
1-4
Ensure correct fog lamp is selected for each side of
vehicle.
Place fog lamp into position inside bumper and push
forward to engage lower clip.
Issue
Date
1
4/3/2019
Lower Clip
Subaru of America
Page
2 / 5
Publicité
