ENGLISH
Before using for the first time
Before using the coffee/tea maker for the first
time, wash, rinse and dry carefully.
How to use the coffee/tea maker
1. Hold the coffee/tea maker firmly and pull the
plunger (a) straight up and out of the pot
(b). Preferably, preheat the pot by rinsing it
with hot water.
2. Add tea or coarsely-ground coffee into the
pot. Use amount of tea or coffee according
to taste. Recommendation: Calculate 1
tablespoon of coffee per decilitre of water
(NA: 1 tablespoon/cup).
3. Fill up with hot water. Always leave a
minimum of 5 cm/2 in. of space at the top of
the pot (ca. 2.5 cm/1 in. below the spout).
See fig. 1.
4. Stir.
5. Place the plunger on top of the pot so that
the lid fits tight (the arrow on the lid should
not point to the spout). Do not press the
plunger down into the pot! See fig. 2.
6. Let the coffee/tea draw for about 4 minutes.
7. Hold the coffee/tea maker firmly with the
spout turned away from you. Lower the
plunger slowly and carefully into the pot. For
best result, apply slight pressure. If the filter
clogs or it becomes difficult to push down
the plunger: Remove the plunger from the
pot, stir the brew and then slowly press the
plunger down again.
8. Turn the lid to open the pour spout and then
pour coffee/tea from the pot and serve. See
fig. 3.
Cleaning
The coffee/tea maker is dishwasher-safe.
Important!
Do not place the coffee/tea maker directly on a
source of heat.
4