Publicité
Les langues disponibles
Les langues disponibles
SFL-LED
INSTALLATION INSTRUCTIONS
Light Shield:
Fix the light barrier to the luminaire with a screwdriver as required.
Laser Pointer:
1.
Attach the bracket to the laser pointer using two #4 screws provided.
2.
Mount the bracket to the fixture using the #8 screw provided.
WIRING
•
Check that the line voltage is correct.
•
Connect fixture GROUND (green) wire to power supply GROUND (green) wire.
•
Connect fixture WHITE wire to power supply NEUTRAL wire.
•
Connect fixture BLACK wire to power supply LINE wire
•
The fixture includes 0-10V dimming functionality, connect GREY or PINK and
VIOLET wires to a 0-10V dimming controller (optional).
RAB Design Lighting inc.
May– 2022
Page 2 of 2
Publicité
