Publicité
Les langues disponibles
Les langues disponibles
3. Master Code
ATTENTION: Before making any operation, take the adhesive you find on the back of the keyboard and put it on
the space here below (as shown in the drawing) where it is written the master code set by the factory.
Attach here the adhesive or
write the master code
ATTENTION: In case of total reset of the device, the master code will come to be the one indicated. The loss of
this code will make the keyboard unusable.
MASTER CODE
4 Changing the master code
1
Enter the MASTER code (1-8 figures). See Paragraph 3
2
Confirm by pressing the B
3
Press 0
Enter the memory location of the ma-
4
ster 00
Enter the new MASTER code from
5
1 to 8 figures long
Press A (only if the access code is
6
shorter that 8 figures)
7
Press B to exit
8
Code changing terminated
The master code is used only for programming.
In case of changing of the master code, it is suggested to write it down here below.
NEW MASTER
CODE
6-1622368
REV.2
26/06/2014
• Long Beep + Amber led FIX ON - Confirm OK
• Series of short Beeps + Amber led flashing - Confirm NOT OK
Long Beep emitted by the keyboard
Long Beep emitted by the keyboard
If the code is 8 figures long, the keyboard emits a Long Beep to
indicate that the code is memorized
Long Beep emitted by the keyboard
Long Beep emitted by the keyboard + amber led OFF
ITA
ENG
FRA
ESP
DEU
POR
3 /12
Publicité
