The Brake; The Push Bar - Mutsy igo Mode D'emploi

English
The frame
Unfold the frame (a, b)
· Press the folding safeguard inwards
(a1) and tilt the upper frame until the
lower support clicks into place (a2) and
move the push-bar backwards until you
hear a second click (b).
· If you unfold the frame, with the push-
chair seat fitted to the frame, you then
have to manually raise the front brace
afterwards.
· Before use always check that the pram
has been unfolded and secured correctly.
Fold the frame (c,d)
· Stand behind the frame and put the
frame on the brake. Push the height ad-
justment button (c1) of the pushbar in
and move this to the lowest setting. Pull
the folding safeguard (c2) towards you on
both sides and turn the pushbar forwards
until the pushbar lies on the frame (c3).
· Pinch the frame unlocking buttons and
fold the frame (d).
· The folding safeguard locks automati-
cally when the product is folded up.
· The integrated carry handle, which is
located under the rear axle, has made
lifting and carrying the folded push-
chair more practical.
The wheels
Assemble the rear wheels (e)
· Slide the axle of the rear wheel in the
rear wheel casing until you hear a click.
Pull the wheel to check that it has been
attached firmly.
Disassemble the rear wheels (f)
· Press the button on the inside of the
rear wheel casing and take the wheel
off the frame
Assemble the front wheels (g)
· Slide the axle of the front wheel up-
6
wards in the front wheel casing un-
til you hear a click. Pull the wheel to
check that it has been attached firmly.
Disassemble the front wheels (g)
· Push the button on the front side of the
front wheel and pull the wheel from the
front wheel casing.
The swivelling wheels (h)
· Turn the ring above the front wheel in-
wards on both sides in order to block
the swivel setting. The swivelling
wheels will automatically be locked
when the wheels are placed in the rear
direction.
· Turn the ring above the front wheel on
both sides outwards to unlock the swiv-
elling wheels.
Pumping up the air tires (IGO accessory:
rear wheels air tyre set)
· The air pressure in the air tires may de-
crease after a while. Check the pres-
sure regularly and is necessary pump
up the tires.
· Press the pump firmly onto the valve.
Pump up the tires until the required
air pressure has been reached. The air
pressure in the tires may never exceed
16 PSI / 1.1 bars.
· Air tires may leave traces on some sur-
faces.
The brake (i)
· Push the pedal downwards with your
foot to block the brake.
· Push the pedal upwards with your foot
to unblock the brake.
The push bar (j)
· The push bar has three different height
positions. Press the push-bar setting but-
ton and move the push-bar higher or low-
er while keeping the button depressed.