Medline Guardian G1-505LX1 Mode D'emploi Et Garantie page 3

when transferring in and out of the commode.
7. The tips on the leg extensions do not contain any rips,
wear or are missing. Immediately replace missing or
damaged tips.
ASSEMBLY:
1. Before assembling seat and
lid, allow toilet seat and lid
to reach room temperature
if exposed to cold. This will
help prevent the seat and lid
clamps from cracking while
being assembled.
2. Align the toilet seat clamps
onto the back frame rail.
(Both clamps should sit
outside the pail brackets).
Push down on seat until
clamps snap firmly into
place over frame rail.
3. Repeat the same process
for the lid.
4. When removing the seat
or lid, always remove lid
first and then the seat. To
remove, grasp the back of
the lid and/or seat and lift.
5. Install commode bucket by
dropping into bucket frame.
Lift bucket from frame to
remove for emptying and
cleaning.
G1-505LX1 (PIC-00244)
REVISED: 06/15/21