General Safety Regulations - Winntec Y440102 Mode D'emploi

INSTRUCTION MANUAL (GB)
FOREWORD:
We thank you for buying this Winntec quality product. Before using
this product, carefully read these instructions and become acquainted
with the safety symbols.

GENERAL SAFETY REGULATIONS

PRODUCTS LABEL)
•
This product is designed and made only for raising loads.
•
Never raise loads on sloping, uneven or soft ground.
•
Do not overload crane beyond rated capacity of each specified
boom position.
•
Boom and load must be in lowest position before moving. Move
slowly and smoothly to avoid uncontrolled swinging.
USE
(ALSO SEE SAFETY SYMBOLS ON THE PRODUCTS LABEL)
•
Insert the handlebar into the handle sleeve of the jack.
•
Check if the pressure release valve is closed (turn clockwise).
•
Start lifting and do not exceed the rated load!!
•
To lower load SLOWLY!! Turn release valve counter-clockwise.
MAINTENANCE:
•
Store crane with boom in fully lowered position and hydraulic ram
valve closed when not in use.
•
Keep the jack clean and check the oil level at least twice a year.
GUARANTEE:
This Winntec product is fully guaranteed against manufacturing defects
for a period of 12 months from the date of purchase.
If your product proves faulty during the guarantee period, it
should be returned to the place of purchase together with the original
receipt.
:
(ALSO SEE SAFETY SYMBOLS ON
: