Publicité
Les langues disponibles
Les langues disponibles
1. Safety Instruction
Please keep this User Manual for future consultation. If you sell the unit to another
user, be sure that they also receive this instruction booklet.
Unpack and check carefully there is no transportation damage before using the unit.
Before operating, ensure that the voltage and frequency of power supply match the
power requirements of the unit.
It's important to ground the yellow/green conductor to earth in order to avoid electric
shock.
The unit must be installed in a location with adequate ventilation, at least 50cm from
adjacent surfaces. Be sure that no ventilation slots are blocked.
Disconnect mains power before replacement or servicing.
Replace only with the same type.
Make sure there are not flammable materials close to the unit while operating, as it is
fire hazard.
Use safety cable when fixes this unit.
In the event of serious operating problem, stop using the unit immediately. Never try
to repair the unit by yourself. Repair carried out by unskilled people can lead to
damage or malfunction. Please contact the nearest authorized technical assistance
center and always use the same type spare parts.
Do not touch any wire during operation as high voltage might be causing electric
shock.
You should never look at the beam light directly in order not to risk any visual
disorders.
For power supply, do not connect in series much more than 19 units, use
another mains supply for next 19 units.
2. Installation
You can install the unit on the truss or ceiling. Use clamps to fix the unit to truss. Always
7-
Publicité
