Edsal Muscle Rack Pro Serie Instructions De Montage page 4

Assembly
5
Assemble E (x2)
E
6
Assemble next shelf level by repeating same steps as 2, 3, 4 and 5 at the desired location
7
Assemble F (x4) to the assembled four posts
F
E
Inside View
E
Insert Hook (E) into the
hole located in center of
beam's bottom ledge.
Inside View
✓
F
Inside View
Attach the top of the Hook
over the wire deck. Push
the beam slightly inward if
needed.
✓
Note: A rubber mallet may be used to help
secure the post connectors halfway onto
the posts by lightly tapping down on the
post connector once it is attached to the
Outside View
post.
✓
✓
Inside View
✓
Hook correctly engaged
into the beam and on
the wire deck. Repeat
for other side.
✓
E