Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4.2
Ceiling Mount
You can adopt ceiling mount or wall mount and purchase hardware accessories by
yourself. The following part takes ceiling mount as an example. Wall mount is similar
to ceiling mount and therefore is omitted here.
1.
Locate the positions of the holes. Paste installation positioning stickers on the
ceiling and lead the cables through the hole on the wall.
Explosion-proof model
2.
Drill holes on the wall. Use a Ø6-6.5mm drill bit to drill 30 mm-depth guide holes
according to the positions marked by stickers.
3.
Mount the plastic rivets of self-tapping screws. Knock the plastic rivets into the
guide holes and ensure that they are tightened up.
Plastic model
6
Publicité
Table des Matières
