Getting Started - ION Pro100BT Guide D'utilisation Rapide

Operation

Getting Started

1. Connect the included power adapter to Pro100BT and use
the power switch to power on Pro100BT.
2. Remove the needle cover from the cartridge.
3. Place the slipmat on the platter and place a record on the
slipmat. If using 45 RPM records, put the 45 RPM adapter
on the center spindle before placing the record on the
platter.
4. Use the 33/45 RPM Selector to set the platter rotation
speed (33/45) to match the type of record.
5. Set the 7"/12" switch to match the record size that you have on the platter.
6. Press the Start button to have the unit automatically place the tonearm.
7. When the record reaches the end or if Stop is pressed during playback, the tonearm will automatically lift and
return to the resting position.
Pairing Pro100BT to a Bluetooth Speaker
Pro100BT has a Bluetooth transmitter to send audio to a Bluetooth speaker wirelessly.
1. Power on your Bluetooth speaker and ensure it is in pairing mode.
2. Power on the Pro100BT turntable.
3. Press and release the Bluetooth button on Pro100BT to start pairing to your Bluetooth device. Once
Pro100BT is connected to the Bluetooth speaker, the Bluetooth LED will be solid blue. Your Bluetooth
speaker should also indicate that it is paired.
Note: Pro100BT will connect to the closest Bluetooth speaker that is near it. If after 5 minutes no Bluetooth
speaker can be found to pair with, the Bluetooth transmitter will become inactive and the LED will turn off.
Note: Maximum range will be achieved when using devices with Bluetooth 4.0 or higher.
4. Play music on your Pro100BT turntable. If you are connected to a Bluetooth speaker with a play/pause button,
and do not hear audio, try pressing the play/pause button.
5. Adjust the volume on your Bluetooth speaker (if applicable) and the volume control on Pro100BT to control
the output level.
6. To disconnect pairing, press the Bluetooth button on Pro100BT or turn off Bluetooth pairing on your
Bluetooth speaker.
Note: Move other Bluetooth receivers/speakers out of range of Pro100BT (30 ft./9.1 m or more) or turn them off to
connect to your Bluetooth speaker.
6
IMPORTANT: Place the included slipmat on
the platter; then place your record on the
slipmat to carefully hold your records.
IMPORTANT: Remove the plastic cartridge
cover (needle cover) before operating the
turntable.