Table des Matières
Publicité
Hand pallet truck SILVERLINE
English
Operating instructions
Functional description
The pallet truck is a manually-operated hydraulic device.
The load is lifted by manipulating the pump lever.
Easy manoeuvrability due to steering rollers of solid-rubber respective Polyurethane and load rollers of
Polyamide respective Polyurethane.
The control lever in the handle can be set to three different positions.
LIFTING – LOWERING – DRIVING
lowering
Lowering position
lifting
Lifting position
Operating:
Moving and steering using the steering handle
The steering handle is connected to the steering rollers. The wheels are steered automatically by moving the
steering handle.
Picking up a load
Check that the load does not exceed the loading capacity
of the pallet truck.
Roll the pallet truck slowly up to the pallet/load. Roll the
fork prongs under the pallet until the back end of the fork
rests against the load (pallet). Lift the load by executing
the pumping movements shown.
Loading diagram
The load must be evenly distributed across both
prongs of the fork.
Moving with the load
As the pallet truck is not equipped with a brake it must not
be used on upward or downward slopes.
As far as floor/ground clearance permits, the load should
be transported across the floor/ground at as low a height
as possible.
Move at a uniform speed appropriate to the load and
floor/ground conditions.
Setting the load down
Lower the load by applying the operating lever in the
handle.
Check that the way is not blocked behind, then move the pallet truck away.
Technische Änderungen vorbehalten
pump movement
driving
Driving position
Design changes under reserve
F 08.01.116
Sous réserve de modifications techniques !
8
Publicité
Table des Matières
