Service Parts - Ortech OD45-9005 Mode D'emploi

INSTALL GRILLE
Install ceiling material to complete the ceiling construction. Then, cut around
the fan housing.
To attach the grille assembly to the fan housing, pinch the grille springs on
the sides of the grille assembly, and position the grille into the housing with
the grille springs in the appropriate slots. Push the grille assembly towards
the ceiling to secure.

SERVICE PARTS

PART PART NAME
1 Grille Assembly (includes part 2)
2 Grille Spring
3 Motor Plate
4 Motor
5 Blower Wheel
6 Wire Panel / Harness Assembly
7 Wiring plate
8 Housing
9 Hanger Bar Kit
10 Damper / Duct Connector
a Nut, Hex Lock
b Washer
c Screw
d Isolator
e Screw
* Blower Assembly includes part 5, 4, d, 3, c, b, a.
Replacement installation:Remove the screw (part c), then take out the motor
plate (part 3) from the housing (part 8) by pushing down the rib in the plate
while pulling out on the side of the housing. Replace the broken parts.
WARNING: Before replacing, be sure to turn off power at power source.
WARRANTY
ONE YEAR LIMITED WARRANTY from the original date of purchase against defects in material and workmanship.
This warranty is limited up to the amount of the original purchase price of the product, excluding any labor cost. For
inquiries please visit www.ortechindustries.com or call 1-888-543-6473.
info@ortechindustries.com
www.ortechindustries.ca
Qty.
1
2
1
1
1
1
1
1
1
4
1
4
4
1
4
1
13376 Comber Way 205 Summerlea Rd
Brampton, ON L6T 4E5
Surrey BC V3W 5V9
10
9
2
1
8
7
e
9
6
5
4
d
3
c
b
a
1-888-543-6473
1-888-541-6474