Opale-Paramodels Backpack XL2 Mode D'emploi page 15

Open all the straps of the harness and present the
pilot on it.
Feed all chassis cables through the back of the pilot.
Once the pilot is in place, start by tightening the
straps at the level of the legs.
Close the strap coming from the shoulders, making a
return in the buckle.
Remember to tighten firmly, the pilot must not move.
Perform the same operation on the other side and
finish with the belly strap.
Battery informations:
- The batteries are housed in the body of the pilot
and for greater ease, they are inserted from the front.
You can accommodate up to 2x4S 4000mAh (make
sure the dimensions are compatible, the driver ac-
cepts a total width of 68mm batteries)
O pal e - Pa ramo del s. co m
Opale Aero System SARL - 23 rue de la Motte
62250 MARQUISE - France
15
contact@opale-paramodels.com +33(0)981 144 387