Crouzet GNR Mini Fiche D'installation page 2

CONNECTION
CONNECTION
OUTPUT WIRING
NUMBER OF WIRES - Direct connection with wires with or without ferrules
1
SOLID STRANDED
(No ferrule) (With ferrule)
4 mm² 2.5 mm²
AWG12 AWG14
RECOMMENDED TIGHTENING TORQUE:
DERATING CURVES
GNR Mini - 4 A
5
4,5
4
3,5
3
2,5
2
1,5
1
0,5
0
0 10 20 30 40 50
Ambient Temperature (°C)
IMPORTANT CONSIDERATIONS
Electrical equipment should be installed, operated, serviced and maintained only by
qualified personnel. No responsibility is assumed by Crouzet for any consequences
arising out of use of this manual. Be sure to use input and output voltage within
operating ranges.
!
WARNING: The product's side panels may be hot, allow the product to cool before
touching. Please follow mounting instructions. Failure to follow these instructions can
result in serious injury or equipment damage.
WARNING WARNING
RISK OF MATERIAL DAMAGE AND HOT ENCLOSURE
• Confirm that the product power supply voltage and its tolerances are compatible
with those of the electrical network.
• The product's side panels may be hot, allow the product to cool before touching.
• Follow proper mounting instructions including torque values.
• Do not allow liquids or foreign objects to enter this product.
For more information please go to www.crouzet.com
SSR - DIN-RAIL MOUNT
2
SOLID STRANDED
(No ferrule) (With ferrule)
4 mm² 2.5 mm²
AWG12 AWG14
M5 SCREW N.M
Min 0.4 / Max 0.5
60 70 80 90
MINI
INPUT WIRING
NUMBER OF WIRES - Direct connection with wires with or without ferrules
1
SOLID STRANDED
(No ferrule) (With ferrule)
4 mm² 2.5 mm²
AWG12 AWG14
RECOMMENDED TIGHTENING TORQUE:
SCREWDRIVER TYPE:
POZIDRIV 2
GNRD Mini - 4 A
4,5
4
3,5
3
2,5
2
1,5
1
0,5
0
0 10 20 30 40 50
Ambient Temperature (°C)
TRANSIENT VOLTAGE
In AC power lines, transient voltages are common and may pose a risk for the
operation, load and reliability of the SSR. In Crouzet SSR, the transient protection can
rise 800 V (please refer to product datasheet).
User may also use external transient protection to the SSR for additional protection
(please refer to product datasheet).
DANGER
!
HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH
Turn off power supply before working on this equipment.
Failure to follow these instructions can result in death, serious
injury or equipment damage.
INSTALLATION SHEET
C.MC.DEF.00897.EN
2
SOLID STRANDED
(No ferrule) (With ferrule)
4 mm² 2.5 mm²
AWG12 AWG14
M5 SCREW N.M
Min 0.4 / Max 0.5
60 70 80 90 100