Operation Instruction - VESUVIO VESIN08N Manuel D'utilisation Et D'installation

C．Wiring
1) Connect to appropriate power supply, the voltage should comply with the
rated voltage of the products.
2) Earth the machine well.
3) Wiring must be handled by a professional technician according to the
circuit diagram.
4) Set leakage protector according to the local code for wiring (leakage
operating current ≤ 30mA).
5) The layout of power cable and signal cable should be orderly and not
affecting each other.
D．Switch on after finishing all wiring construction and re-checking.
VI. Operation instruction
Picture for keys
Symbol Designation
Power ON/OFF Press to power on or off the heat pump
Mode Press to select Smart/Silence mode
Heat/Cool/Auto Press to shift among cooling, heating and auto
Up/ Down Press to set desired water temperature
Operation
8