Bello Triple Play TPC361 Instructions D'assemblage page 10

Fig. 1-4
yF5
yF20
yF24
yF5
yF19
1-8. AttAch the Rear Legs (YF17 & YF19) to the Middle Shelf Frame (YF29) with two 32 mm Screws (YF5) and to the L-Bracket Supports
(YF15) using four 12 mm Bolts (YF2) as shown. Do not yet fully tighten. note (!): the rear legs have holes at the top that are
centereD in the leg.
1-9. AttAch the Front Legs (YF18 & YF20) to the Middle Shelf Frame (YF29) with two 32 mm Screws (YF5), to the L-Bracket Supports
(YF15) using four 12 mm Bolts (YF2), and to the Bottom Support Bar (YF24) using two 12 mm Bolts (YF2) as shown above.
Do not yet fully tighten. note (!): the front legs have holes at the top that are not centered in the leg.
1-10. after all parts are attacheD correctly, Go back anD fully tiGhten all bolts.
1-11. screw five Adjustable Leveling Feet (YF11) into the underside furniture assembly. These Feet provide additional support to the furniture.
It is important that these Feet are properly adjusted to rest firmly on the ground once the furniture is assembled and in place. Adjust by
turning the Feet.
note: if you will be usinG the tpc361 as a tV stanD only (option 1),
skip to paGe 23 for Glass shelf installation instructions.
yF5
yF29
!
yF2
yF11
yF2
yF18
yF2
yF17
yF2