DU.IT14NE/NVE
• Do not stand in the movement area of the gate.
• Do not let children play with controls and near the gate.
• Should operating faults occur, do not attempt to repair the fault but call a qualified technician.
Should a power failure or a break-down occur, the gate can be manually opened and closed as follows (refer
to figure):
1 Remove the protection cap "T" of the gate lock which is pressure-inserted.
2 Insert the key "C" and turn it until rotation is no longer smooth.
3 Rotate the lever "L" in either direction until activation of the limit switch.
Now the gate can be manually operated.
To reset the automatic operation of the gate, move the lever "L" back to the original position, turn and extract
the special key "CE" and replace the cap "T". The normal operation of the gate will be reset with the first
movement of the gate.
• Every month check the good operation of the emergency manual release.
• It is mandatory not to carry out extraordinary maintenance or repairs as accidents may be caused.
operations must be carried out by qualified personnel only.
• The operator is maintenance free but it is necessary to check periodically if the safety devices and the other
components of the automation system work properly. Wear and tear of some components could cause
dangers.
If the product must be dismantled, it must be disposed according to regulations in force regarding the dif-
ferentiated waste disposal and the recycling of components (metals, plastics, electric cables, etc..). For this
operation it is advisable to call your installer or a specialised company.
All Benincá products are covered by insurance policy for any possible damages to objects and persons caused
by construction faults under condition that the entire system be marked CE and only Benincá parts be used.
Position for the automatic operation.
User's handbook
Safety rules
Manual and emergency operation
Maintenance
Waste disposal
Warning
T
C
T
L
L
Position for the manual operation.
These
17