My Geko Gear ORBIT 950 Manuel D'utilisation Rapide page 8

LED
Green - Flashing indicates recording
Red - Indicates there is power supplied
Micro SD Card Insert and Removal
NOTE: Ensure the dash cam is turned off before inserting or removing the microSD card.
1.Insert the micro SD card into the micro SD card slot on the dash cam . Please pay attention to
the direction of the memory card, once inputted and gently pushed in, you should hear a click.
2.To take out the Micro SD card, please gently press down the Micro SD card and it will p op out
from the slot.
Caution！
1. Please pay attention to the direction of the Micro SD card when inserting.
2. If you are going to upgrade bigger capacity Micro SD card, please refer to the compatible microSD
card brands on www.mygekogear.com or contact myGEKOgear customer service.
3. Please use a high-speed Micro SD card (Class10 or above).
Menu
In Recording Mode, press the Menu / Return button to enter Settings, then press the Left/Right button to choose
the option you want. Press the OK button to confirm.
1.Album: Normal / Event / Picture
2.Wi-Fi: On / Off
3.GPS Status
4.GPS Time Sync: On / Off
5.Speed Unit: Km/h / mph
6.Speed Limit Alert: Off / 50Km/h / 60Km/h / 70Km/h / 80Km/h / 90Km/h / 100Km/h / 110Km/h /
120Km/h / 130Km/h / 140Km/h / 150Km/h / 160Km/h / 170Km/h / 180Km/h / 190Km/h / 200Km/h
7.Time Zone Select: +08:00 / +09:00 / +10:00 / +11:00 / +12:00 / +13:00 / +14:00 / -12:00 / -11:00
/ -10:00 / -09:00 / -08:00 / -07:00 / -06:00 / -05:00 / -04:00 / -03:00 / -02:00 /
-00:00 / +01:00 / +02:00 / +03:00 / +04:00 / +05:00 / +06:00 / +07:00
8.LDWS: On / Off
9.FCWS: On / Off
10.Clock Settings: YY/MM/DD