Switching On And Off - Niceboy HIVE PODS 3 ULTRA Mode D'emploi

FIRST START-UP AND PAIRING
1. Remove both earphones from the pack and remove the stickers protecting
the earphone charging pins (4).
2. Place both earphones in the charging box and let them charge. Durin char-
ging, the LED indicator glows red and turns off once charging is completed.
3. Remove the earphones from the box. They will switch themselves on and
pair with each other automatically.
4. After the LED on one of the headphones (2) starts flashing blue, the head-
phones are ready to connect to a Bluetooth device.
5. Open Bluetooth settings on your device and search for Niceboy HIVE Pods
3 Ultra in the list of available devices.
6. Successful pairing will be announced by an acoustic message and the LEDs
(2) will turn off. To reconnect to a device that has already been paired, sim-
ply remove the earphones from the box. They will switch on and connect
to the device automatically.

SWITCHING ON AND OFF

To switch the earphones on, simply remove them from the charging box, or
manually switch them on by pressing and holding both multi-functional bu-
ttons. To switch them off, simply place the earphones in the charging box. They
will automatically turn off and disconnect from your device. The earphones are
placed correctly in the box when the LED (2) lights up in red. When the earpho-
nes are fully charged, the LED turns off. You can also turn off the earphones
by pressing and holding both multi-functional buttons for approx.4 s. The
earphones turn off after 5 minutes of inactivity to save power.
16